Moxa Technologies NPort 5210A User Manual

NPort 5000 Series User Manual
47
Auto Warning Settings
The NPort device server can automatically warn administrators of certain system, network, and
configuration events. Depending on the event, different options for automatic notification are available.
These options are configured in the Auto Warning Settings.
Auto warning: E-mail and SNMP trap
The Email and SNMP trap parameters are used to configure how e-mail and SNMP traps are sent when an
automatic warning is issued by the NPort device server.
Web Interface for the NPort 5100, 5200, IA5000 Series
Web Interface for the Overall NPort 5000 Series

Moxa Technologies NPort 5210A Specifications

General

Baud rate	230.4 Kbit/s
Data bits	5, 6, 7, 8
Stop bits	1, 1.5, 2
Certification	CE, FCC
RS-232 signals	CTS, DCD, DSR, DTR, GND, RTS, Rx, Tx
Flow control support	Yes
Serial interface type	RS-232
Serial ports quantity	2
Ethernet LAN data rates	10, 100 Mbit/s
Mean time between failures (MTBF)	134850 h
Product color	Black, Blue
Housing material	Metal
Input voltage	12 - 48 V
Power consumption	325 mA
Storage temperature (T-T)	-40 - 75 °C
Maximum operating altitude	2000 m
Operating temperature (T-T)	0 - 55 °C
Operating relative humidity (H-H)	5 - 95 %
Supported network protocols	ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP

Weight and Dimensions

Weight	340 g
Dimensions (WxDxH)	90 x 100.4 x 22 mm