Moxa Technologies NPort 5210A User Manual

NPort 5000 Series User Manual
134
7. NPort CE Driver Manager for Windows
CE
NPort CE Driver Manager for Windows CE applies to the NPort 5000 and NPort IA5000 Series only.
Overview
ATTENTION
Before installing and the configuring the NPort Administration suite, make sure your user privilege is set as
system administrator.
Installing NPort CE Driver Manager
1. Copy “NPortCab.cab” to Windows CE and start to install driver by double clicking on it.
2. Click on “OK” to complete the installation when the following screen appears.
3. Driver installation is now complete and the “NPortCab.cab” icon disappears from the screen. This is
normal when installing drivers in Windows CE.

Moxa Technologies NPort 5210A Specifications

General

Baud rate	230.4 Kbit/s
Data bits	5, 6, 7, 8
Stop bits	1, 1.5, 2
Certification	CE, FCC
RS-232 signals	CTS, DCD, DSR, DTR, GND, RTS, Rx, Tx
Flow control support	Yes
Serial interface type	RS-232
Serial ports quantity	2
Ethernet LAN data rates	10, 100 Mbit/s
Mean time between failures (MTBF)	134850 h
Product color	Black, Blue
Housing material	Metal
Input voltage	12 - 48 V
Power consumption	325 mA
Storage temperature (T-T)	-40 - 75 °C
Maximum operating altitude	2000 m
Operating temperature (T-T)	0 - 55 °C
Operating relative humidity (H-H)	5 - 95 %
Supported network protocols	ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP

Weight and Dimensions

Weight	340 g
Dimensions (WxDxH)	90 x 100.4 x 22 mm