EasyManuals Logo

Moxa Technologies NPort 5210A User Manual

Moxa Technologies NPort 5210A
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #109 background imageLoading...
Page #109 background image
NPort 5000 Series User Manual
109
Export Configuration
The Export Configuration function is a handy tool that can be used to produce a text file that contains the
current configuration of a particular NPort.
If you are using the NPort 5100 Series, NPort 5200 Series, or NPort IA5000 Series and Administration Suite
v1.22 or above, to export the configuration of an NPort, right-click NPort, select Export Configuration. An
Export Password window will pop up for the user to assign a password for the exported configuration file.
The exported configuration file will be encrypted for security purpose. You will need the same password you
use for the exported file to import the same file back into the NPort.
After assigning the export password, click the Browse button to set the file name and path, and then click
OK.
For the overall NPort 5000 Series with security enhanced firmware version, export configuration encryption
will be based on the Pre-shared key defined in the NPort (default is empty password, and you may configure
the password in Configuration -> Configuration Pre-shared Key. So when you are exporting the
configuration file, you are only required to select the output file location. You may refer to page 2-21 for the
security firmware version for your NPort.

Table of Contents

Other manuals for Moxa Technologies NPort 5210A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Moxa Technologies NPort 5210A and is the answer not in the manual?

Moxa Technologies NPort 5210A Specifications

General IconGeneral
Baud rate230.4 Kbit/s
Data bits5, 6, 7, 8
Stop bits1, 1.5, 2
CertificationCE, FCC
RS-232 signalsCTS, DCD, DSR, DTR, GND, RTS, Rx, Tx
Flow control supportYes
Serial interface typeRS-232
Serial ports quantity2
Ethernet LAN data rates10, 100 Mbit/s
Mean time between failures (MTBF)134850 h
Product colorBlack, Blue
Housing materialMetal
Input voltage12 - 48 V
Power consumption325 mA
Storage temperature (T-T)-40 - 75 °C
Maximum operating altitude2000 m
Operating temperature (T-T)0 - 55 °C
Operating relative humidity (H-H)5 - 95 %
Supported network protocolsICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP
Weight and Dimensions IconWeight and Dimensions
Weight340 g
Dimensions (WxDxH)90 x 100.4 x 22 mm

Related product manuals