Need help?Do you have a question about the Moxa Technologies UPORT 1130 and is the answer not in the manual?
General| Connector 1 | USB |
|---|---|
| Connector 2 | DB-9M |
| Connector 1 gender | Male |
| Depth (imperial) | 2.36 \ |
| Width (imperial) | 1.51 \ |
| Height (imperial) | 0.79 \ |
| Weight (imperial) | 0.14 lbs |
| Dimensions (WxDxH) | 38.4 x 60 x 20 mm |
| Product color | Silver |
| Data transfer rate | 0.012 Gbit/s |
| Compatible operating systems | Windows 98, ME, 2000, XP (x86/x64), 2003 (x86/x64), Vista (x86/x64) WinCE 5.0 Linux 2.6 (x86/x64), Linux 2.4 (x86/x64) |
| Input voltage | 5 V |
Weight and Dimensions| Weight | 65 g |
|---|
Describes the UPort 1100 series as USB-to-serial converters for adding COM ports.
Explains the ARDC feature for automatic data transmission recovery upon cable disconnection.
Lists all items included in the standard UPort package.
Highlights the main capabilities and advantages of the UPort converters.
Provides technical data including speed, ports, connectivity, and physical characteristics.
Specifies the acceptable operating and storage environmental conditions.
Lists relevant electromagnetic compatibility (EMC) and environmental certifications.
Details the power draw for each UPort 1100 series model.
Explains the meaning and behavior of the LEDs on the UPort devices.
Guides on setting pull-high/low and termination resistors for RS-485.
Provides step-by-step instructions for installing the UPort driver software.
Outlines the physical connection and detection process of the UPort hardware.
Specific steps for installing hardware on older Windows operating systems.
Specific steps for installing hardware on modern Windows operating systems.
Details how to manage COM port assignments and properties using Device Manager.
Explains how to change COM numbers and advanced settings via the configuration tool.
Describes the physical disconnection of the UPort from the USB port.
Provides instructions to remove the driver software via Windows Control Panel.
Introduces advanced configuration utilities available for UPort drivers.
Explains how to assign fixed COM port numbers for consistent device identification.
General guide for installing the UPort driver on Linux systems.
Specific instructions for installing drivers on older Linux kernel versions.
How to configure serial interface settings (e.g., RS-485 modes) in Linux.
Specific instructions for installing drivers on newer Linux kernel versions.
General guide for installing UPort drivers on Windows CE platforms.
Steps for installing the driver using an installation package for Win CE 6.0.
Steps for installing the driver using an installation package for Win CE 5.0.
Instructions on how to uninstall WinCE drivers from the device.
Process for installing WinCE drivers using a CAB file.
Detailed steps for removing WinCE drivers through Control Panel.
Shows the pinout for the UPort's male DB9 serial connector.
Details the pinout for the terminal block converter used with certain models.
States the device's compliance with FCC and IC electromagnetic interference regulations.
Information regarding the WEEE Directive and disposal of electronic equipment.
To Next Page
