Moxa Technologies UPORT 1130 User Manual

UPort 1100 Series Installation and Configuration
2-13
Removing the Converter
The converter is a plug and play device. No special procedures are required to remove the converter; you may
simply pull the converter out of the USB port. You should verify that no data is being transmitted before
removing the converter.
Removing the converter does not remove the drivers. The drivers remain in place so that the converter can be
automatically detected and installed if it is pluged back into the USB port.
The converter can also be uninstalled through the Device Manager, the same as other Windows devices.
Right-click the converter, which will be found under Multi-port serial adaptors, then select Uninstall from
the context menu.

Moxa Technologies UPORT 1130 Specifications

General

Connector 1	USB
Connector 2	DB-9M
Connector 1 gender	Male
Depth (imperial)	2.36 \
Width (imperial)	1.51 \
Height (imperial)	0.79 \
Weight (imperial)	0.14 lbs
Dimensions (WxDxH)	38.4 x 60 x 20 mm
Product color	Silver
Data transfer rate	0.012 Gbit/s
Compatible operating systems	Windows 98, ME, 2000, XP (x86/x64), 2003 (x86/x64), Vista (x86/x64) WinCE 5.0 Linux 2.6 (x86/x64), Linux 2.4 (x86/x64)
Input voltage	5 V

Weight and Dimensions

Weight	65 g