NPort 5000 Series User Manual
2. Select a COM number that is not in use or assigned to a Group and click OK.
3. You will be able to view the serial ports that were assigned to and removed from the Group. Click Apply
to apply the settings.
4. Finally, click Yes to confirm.
Modify Ports in a COM Group
In the following subsections we examine three ways in which the serial ports in a COM Group can be
modified:
Changing the COM Number of a COM Group
1. Select all serial ports in the Group and right-click to select COM Settings.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
