- 2 -
Overview
NPort 5100 series of device servers are compact, palm-sized data
communication devices that allow you to control RS-232 (NPort 5110),
RS-422/485 (NPort 5130), and RS-232/422/485 (NPort 5150) serial
devices over a TCP/IP-based Ethernet.
“-T” indicates an extended temperature model.
Package Checklist
Before installing the NPort 5100 series of device servers, verify that the
package contains the following items:
• 1 NPort 5100 Series 1-port serial device server
• 100 to 240 VAC power adapter (excluding T models)
• 4 stick-on pads
• Quick Installation Guide
• Warranty card
Optional Accessories
• DK-35A: DIN-Rail Mounting Kit (35 mm)
otify your sales representative if any of the above items are
The operating temperature of the power adapter in the box is
from 0 to 40°C. If your application is out of this range, please
use a power adapter supplied by UL
Supply (The power output meets SELV and LPS and rated 12
48 VDC, minimum current 0.73 A). Moxa has power adapters
with wide temperature range (
-40 to 75°C, -40 to 167°F), the
PWR-12150-(plug type)-SA-T series, for your reference.
To Next Page
Loading...
Need help?
General
