Need help?Do you have a question about the Moxa Technologies NPort 5150 and is the answer not in the manual?
General| Model | NPort 5150 |
|---|---|
| Category | Serial Device Server |
| Serial Ports | 1 |
| Interface | RS-232/422/485 |
| Baud Rate | 50 bps to 921.6 kbps |
| Data Rate | Up to 921.6 Kbps |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 1.5, 2 |
| Parity | None, Even, Odd, Space, Mark |
| Ethernet | 10/100 Mbps |
| Power Input | 12 to 48 VDC |
| Flow Control | RTS/CTS, XON/XOFF |
| Network Interface | 10/100BaseT Ethernet |
| Protocols | TCP/IP, UDP, HTTP, Telnet, SNMP |
| Humidity | 5% to 95% (non-condensing) |
| Certifications | CE, FCC, UL |
Introduces NPort Administration Suite for configuration, monitoring, and management.
Details serial communication parameters like baud rate, data bits, stop bits, parity, and flow control.
Configuring device port operation modes and associated parameters for network interaction.
Configuring network parameters such as IP address, Netmask, Gateway, and DNS servers.
How Real COM mode uses drivers to establish transparent connections and supports multiple hosts.
NPort acts as a server, waiting for host connections for data transmission.
NPort actively establishes TCP connections to a predetermined host computer for serial data.
Best practices for changing default credentials, using strong passwords, and enabling lockout features.
To Next Page
