Need help?Do you have a question about the Moxa Technologies NPort 5450AI-M12 and is the answer not in the manual?
General| Certification | CE, FCC, EN 55022 Class A, FCC Part 15 Subpart B Class A, EN 55024, EN 50155, EN 50121-4, IEC 60068-2-6 |
|---|---|
| RS-232 signals | CTS, DCD, DSR, DTR, GND, RTS, Rx, Tx |
| RS-422 signals | GND, RxD+, RxD-, TxD+, TxD- |
| RS-485 signals | Data+, Data-, GND, RxD+, RxD-, TxD+, TxD- |
| Flow control support | Yes |
| Serial interface type | RS-232/422/485 |
| Serial ports quantity | 4 |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN (RJ-45) ports | 1 |
| Supported network protocols | ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2, LLDP |
| Input voltage | 12 - 48 V |
| Operating temperature (T-T) | -25 - 55 °C |
| Safety | UL 60950-1, EN 60950-1 |
| Compatible operating systems | Windows 98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8 x86/x64, 2012 x64\\r SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac 10.3\\r Linux kernel 2.4.x, 2.6.x, 3.x |
Weight and Dimensions| Weight | 686 g |
|---|---|
| Dimensions (WxDxH) | 80 x 216.6 x 52.9 mm |
Details how to set the operational mode for each NPort device port for network interaction.
Describes mapping NPort serial ports to host COM ports for application access in Real COM mode.
Covers configuration of IP address, Netmask, Gateway, and DNS for network connectivity.
Describes how to configure serial communication parameters like baud rate, data bits, and flow control.
Details configuration of device port operation modes and associated parameters.
Details settings for user account security, password complexity, and login failure lockout.
Enables transparent connection between host and serial device via local COM/TTY ports using drivers.
Configures NPort to listen for host connections on a specific IP:Port for data transmission.
Allows NPort to actively establish TCP connections to a predetermined host computer.
Facilitates faster, efficient data transfer using UDP, supporting unicast or multicast communication.
Describes how to map NPort serial ports to host COM ports for application access.
Illustrates the pin assignments for Ethernet and Serial ports on various NPort models.
Provides visual guides for creating correct Ethernet and Serial cables for NPort connections.
To Next Page
