EasyManuals Logo

Moxa Technologies NPort 5450AI-M12 User Manual

Moxa Technologies NPort 5450AI-M12
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #106 background imageLoading...
Page #106 background image
NPort 5000 Series User Manual
106
Fixed
The NPort is not password protected, and “Search by IP address” was used to locate it.
Lock Fixed
The NPort is password protected, “Specify by IP address” was used to locate it, and the password has not
yet been entered from within the current Administrator session.
Unlock Fixed
The NPort is password protected, “Specify by IP address” was used to locate it, and the password has been
entered from within the current Administrator session. Henceforth during this Administrator session,
activating various utilities for this NPort will not require re-entering the server password.
Configuring NPort
In this section, we illustrate how to access the NPort’s configuration utility. You should first make sure that
you can connect over the network from your computer to the NPort.
1. To start NPort Administrator, click Start
NPort Administration Suite NPort Administrator.
2. Unlock the NPort you wish to configure if it is password protected. Right click the NPort and select
Configure to start the configuration.
3. The progress bar shows that Administrator is retrieving configuration information from the specific
NPort.

Table of Contents

Other manuals for Moxa Technologies NPort 5450AI-M12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Moxa Technologies NPort 5450AI-M12 and is the answer not in the manual?

Moxa Technologies NPort 5450AI-M12 Specifications

General IconGeneral
CertificationCE, FCC, EN 55022 Class A, FCC Part 15 Subpart B Class A, EN 55024, EN 50155, EN 50121-4, IEC 60068-2-6
RS-232 signalsCTS, DCD, DSR, DTR, GND, RTS, Rx, Tx
RS-422 signalsGND, RxD+, RxD-, TxD+, TxD-
RS-485 signalsData+, Data-, GND, RxD+, RxD-, TxD+, TxD-
Flow control supportYes
Serial interface typeRS-232/422/485
Serial ports quantity4
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN (RJ-45) ports1
Supported network protocolsICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2, LLDP
Input voltage12 - 48 V
Operating temperature (T-T)-25 - 55 °C
SafetyUL 60950-1, EN 60950-1
Compatible operating systemsWindows 98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8 x86/x64, 2012 x64\\r SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac 10.3\\r Linux kernel 2.4.x, 2.6.x, 3.x
Weight and Dimensions IconWeight and Dimensions
Weight686 g
Dimensions (WxDxH)80 x 216.6 x 52.9 mm

Related product manuals