Need help?Do you have a question about the Moxa Technologies NPort 5250A and is the answer not in the manual?
General| Certification | CE, FCC EN 55022 Class A, FCC Part 15 Subpart B Class A EN 55024 EN 61000-4-4 EN 61000-4-5 |
|---|---|
| Serial interface type | RS-232/422/485 |
| Serial ports quantity | 1 |
| Supported network protocols | ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2 |
| Storage temperature (T-T) | -40 - 75 °C |
| Operating temperature (T-T) | 0 - 60 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Safety | UL 60950-1, EN 60950-1 |
Weight and Dimensions| Weight | 340 g |
|---|---|
| Dimensions (WxDxH) | 77 x 111 x 26 mm |
Guides users on installing and utilizing the NPort Administrator suite for configuration.
Covers configuring essential network and general operational parameters for NPort devices.
Explains how to select and configure the operation mode for each NPort device port.
Details settings like baud rate, data bits, parity, and flow control for serial ports.
Emphasizes changing default credentials and using strong passwords for device security.
Explains the Real COM driver for transparent serial connections, allowing existing software use.
Describes the NPort acting as a TCP server, passively waiting for host connections.
Explains the NPort acting as a TCP client, actively establishing connections to a host.
Provides a step-by-step guide for installing the NPort Administrator utility.
Describes how to map NPort serial ports to host COM ports for application access.
Provides instructions for obtaining and installing the Real TTY driver files on Linux.
Details how to map NPort serial ports to Linux host tty ports using the mxaddsvr command.
Provides instructions for downloading and installing the NPort macOS TTY driver.
Guides users on mapping NPort serial ports to macOS tty ports using NPortConnect.
Illustrates the pin assignments for Ethernet and serial ports on various NPort models.
To Next Page
