Moxa Technologies NPort 5250A User Manual

NPort 5000 Series User Manual
55
Change Password
You can set a password to restrict access to the NPort’s configuration parameters. (The default password for
NPort is moxa.) If a user does not enter the correct password when accessing the NPort through one of the
consoles (e.g., web console), access to the NPort configuration settings will be denied.
Web Interface for the NPort 5100, 5200, IA5000 Series Only
Web Interface for the Overall NPort 5000 Series
ATTENTION
If you forget the NPort’s password, the ONLY way to configure the NPort is by using the hardware reset
button to load the factory defaults. Before you set a password for the first time, it is a good idea to export
the NPort’s complete configuration to a file. Your configuration can then be easily restored if necessary.

Moxa Technologies NPort 5250A Specifications

General

Certification	CE, FCC EN 55022 Class A, FCC Part 15 Subpart B Class A EN 55024 EN 61000-4-4 EN 61000-4-5
Serial interface type	RS-232/422/485
Serial ports quantity	1
Supported network protocols	ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2
Storage temperature (T-T)	-40 - 75 °C
Operating temperature (T-T)	0 - 60 °C
Operating relative humidity (H-H)	5 - 95 %
Safety	UL 60950-1, EN 60950-1

Weight and Dimensions

Weight	340 g
Dimensions (WxDxH)	77 x 111 x 26 mm