Moxa Technologies NPort 5250A User Manual

NPort 5000 Series User Manual
132
IP Address Report
When the NPort is used in a dynamic IP environment, users must spend more time with IP management
tasks. NPort serial device servers help out by periodically reporting their IP address to the IP location
server, in case the dynamic IP has changed.
1. Configure the NPort with Dynamic IP settings (DHCP, BOOTP, or DHCP/BOOTP). Assign the remote Auto
IP report server’s IP address and UDP port.
2. Select the IP Address Report, and click the right mouse button to select Settings.
3. Configure the Local Listen Port to be the same as the NPort’s “Auto report to UDP port” setting.

Moxa Technologies NPort 5250A Specifications

General

Certification	CE, FCC EN 55022 Class A, FCC Part 15 Subpart B Class A EN 55024 EN 61000-4-4 EN 61000-4-5
Serial interface type	RS-232/422/485
Serial ports quantity	1
Supported network protocols	ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2
Storage temperature (T-T)	-40 - 75 °C
Operating temperature (T-T)	0 - 60 °C
Operating relative humidity (H-H)	5 - 95 %
Safety	UL 60950-1, EN 60950-1

Weight and Dimensions

Weight	340 g
Dimensions (WxDxH)	77 x 111 x 26 mm