NPort IA5150/5250 Series User’s Manual Initial IP Address Configuration
3-7
6. Press the “ ` ” key continuously and then power on the NPort IA5150/5250.
7. NPort IA5150/5250 will automatically switch from data mode to console mode as it receives a
continuous string of “ ` ”.
8. Input the password when prompted. Note that this page will only appear when the NPort
IA5150/5250 has been set up for password protection.
9. Start configuring the IP address under Network Settings. Refer to step 4 in the Telnet
Console section for the rest of the IP settings.
To Next Page
Loading...
