NPort IA5150/5250 Series User’s Manual Configuring NPort Administrator
6-9
2. Unlock the NPort IA5150/5250 you wish to configure if it is password protected. Right click
on the NPort IA5150/5250 and select Configure to start the configuration.
3. The progress bar shows that Administrator is retrieving configuration information from the
specific NPort IA5150/5250.
4. Refer to Chapter 5 for each parameter’s function definition. To modify the configuration, you
must first click in the modify box to activate the parameter setting box. For example, click on
the middle modify box.
To Next Page
Loading...
