NPort Server Pro User’s Manual 4-1
4
4
4. Setting Up Single-Host
In this chapter we explain how to set up NPort Server Pro for Single-Host Mode. This type of
application uses one Windows NT/95/98 server to control several serial devices in a manner similar
to the way you would use a traditional multi-port serial board.
We cover the following topics:
q Driver and Software Installation
q Using NPort Pro Manager
— Saving Your Configuration
— Adding an NPort Server Pro—Add Server Wizard
— Deleting a Server
— Modifying COM Name Mappings
Ø Changing All COM Names Consecutively
Ø Changing the COM Name of One Port
— Un-Mapping a Port
— Configuring Server Properties
Ø Server Properties—General
Ø Server Properties—Password
Ø Server Properties—Transmission
— Upgrading NPort Server Pro Firmware
To Next Page
Loading...
