6-26 NPort Server Pro User’s Manual
Removing a Granted Host
1. Click on the port whose host you would like to modify.
2. Click on the IP address you want to delete, and then click on Remove .
3. Click OK to finish.
Adding Routes to NPort Server Pro
To enable access from an Internet/Intranet host, first make sure your NPort Server Pro can be
connected through the Internet.
You may add routes into NPort Server Pro if your Windows NT/95/98 host is at a remote site. This
section lists the steps you should follow to add new routes, including examples you can refer to.
To Next Page
Loading...
