5-2 NPort Server Pro User’s Manual
q Access Control
— Configuring Through View by IP
Ø Adding Access Permission of One Host
Ø Modifying the Host Settings
Ø Removing Ports from a Granted Host
Ø Removing a Granted Host
— Configuring Through View by Port
Ø Adding a Host IP Address to a Specific Port
Ø Modifying a Granted Host
Ø Removing Granted Host
Figure 5-1. Application with three hosts and two NPort Server Pros.
. Note: If you need to set up Single-Host Mode or Custom Mode, refer to Chapters 4 and 6,
respectively, for complete descriptions of these types of application.
To Next Page
Loading...
