Setting Up Multi-Host
NPort Server Pro User’s Manual 5-9
. Note: If you have several servers hooked up to your network, and it’s not clear which server
is the one you are currently adding, click on Locate in the Add Server Wizard window
shown in step 2 above. The “Ready” LED on the listed server will start blinking,
allowing you to identify it.
3. If you are the system administrator and know the current password, or if you are setting
up a new password, select Yes, I am the administrator and then enter the password in
the text input box.
If you select No, I am a general user, you will be allowed to install your NPort Server
Pro, but you will not be able to change any of the parameter settings. Click on Next to
continue.
To Next Page
Loading...
