5-12 NPort Server Pro User’s Manual
7. This evokes the NPort Pro Manager program, with the newly installed server listed.
8. Click on the server name to highlight it. Basic information about the server’s COM
ports will be listed in the right info box.
. Note: If you see ports with status ‘Non-authorized’, and you are a general user, be sure to
ask your server administrator to add access permission so that you may make
modifications to the server.
. Note: The NPort Pro Manager title bar shows the application mode of the newly installed
server—Multi-Host in this case.
9. To add another server, choose Add Server Wizard from the Server menu, or click on
the toolbar Add Server icon, and then repeat the above steps.
10. Before exiting NPort Pro Manger you should save the new configuration. Choose Save
Configuration from the Server menu, or click on the toolbar Save all Servers icon to
carry this out.
11. Exit NPort Pro Manager when you finish.
To Next Page
Loading...
