7
Notes:
1.Before using the NANO SE for the first time, charge the product fully. Disconnect the
product from the charger after charging is completed.
2.Put the phone holder in the unlocked position and install the phone to NANO SE
before turning it on.
3. If the battery indicator shows only 1 bar, it means the battery is too low, charge the
unit as soon as possible.
4. NANO SE is not waterproof. Please do not expose NANO SE to any liquids. Do not
touch it with wet hands. Clean it with a soft dry cloth.
5. When not in use for a long time, please turn off the NANO SE’s power supply, charge
and discharge every 3 months to ensure the battery activity.
6. If you do not use the product for more than 10 days, please discharge its battery to
40%-65% and store it to extend the battery life. To avoid core damage, do not store the
battery for long periods of time after it has been completely discharged.
7. NANO SE is a high-precision control device. Drops or blunt force trauma caused by
external forces can damage the NANO SE and cause functional issues.
8. After the NANO SE is powered on, make sure that nothing is blocking its ability to
rotate fully.
To Next Page
Loading...
