9
Attention
1. Install the mobile phone before turning on the gimbal. Battery life of the NANO SE is
affected by the balance of the mobile phone. If the phone is slightly unbalanced the
gimbal may still be functional but movies will be less stabilized and more battery
power will be required.
2. The roll axis can rotate up to 270°, exceeding this limit may cause damage to the
gimbal.
3. NANO SE will vibrate slightly when the phone is not detected, and will enter the
standby mode. After the mobile phone is installed, short press the power button to
use it normally.
4. The phone clip has been designed to prevent accidental clamping.
To Next Page
Loading...
