Moza SLYPOD PRO - Gearshift Mode

10
Gearshift Mode
Tap the “Upwards” or “Downwards” icon to control the movement of SLYPOD PRO. Tap
again to stop the movement. Tap Take photo icon to control the camera to take a photo.
(Please make sure your SLYPOD PRO is connected with the camera control cable, the
camera control cable needs to be purchased separately). Speed Setting: Tap speed icon
to set the speed, the SLYPOD PRO will move from the current speed to the set speed
and then decelerates to the end position. (The end position speed is 0)
Control the camera
to take photos
Maximum moving
distance is 520mm
Set the up-and-down
movement speed of
the Slypod PRO
Click to control
the movement,
click again to
stop movement
Tap to control the
movement, click again to
stop movement
The current movement
distance is 0mm