16
EN
USING THE VACUUM CLEANER
1. Make sure the vacuum cleaner is properly assembled and the battery is charged.
2. Start the vacuum cleaner with the button (6)
directly on the vacuum cleaner or with the
button (1) on the main handle (fig.8). The op-
eration of the buttons is independent of each
other as long as the vacuum cleaner is in the
main handle.
3. Pressing the power button again makes the
vacuum cleaner work with high suction pow-
er. Another press of the power button switches
off the vacuum cleaner.
4. The electric brush (15) with LEDs (16) illuminat-
ing the vacuumed surface is activated togeth-
er with the vacuum cleaner. The multifunc-
tional electric brush is suitable for vacuuming
all types of hard surfaces and carpets.
5. The use of additional vacuum cleaner accesso-
ries (small brush, crevice brush) is possible after removing the vacuum cleaner from the main
handle. Press the button (4) and remove the vacuum cleaner from the main holder (2) and
then connect a suitable accessory to the end of the vacuum cleaner (fig.9).
Fig. 8
Fig. 9
Fig. 10
To Next Page
Loading...
Need help?
General
