18
EN
4. Periodically clean the rotating electric brush roller. The roll can be removed by pressing the
button (15) on top of the electric brush. After cleaning the roll, place it back in the electric
brush and lock the roll lock.
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The vacuum cleaner is not starting
Battery discharged Charge the battery
Charging process in progress Wait until the process is completed
Low suction power
Clogged brush Remove the cause of clogging
Dust container full Empty the dust container
Dust escapes to the outside of the vacuum
cleaner
Clogged filters Clean the filters
Improperly assembled container Assemble the container correctly
Very fast pulsation of the status light
Damage to the vacuum cleaner’s internal
circuit
Contact an authorised service centre
TECHNICAL DATA
charger vacuum
cleaner
Technical specifications are given on the product nameplate.
Maximum noise level: 69 dB
Caution! MPM agd S.A. reserves the right to technical changes.
PROPER DISPOSAL OF THE PRODUCT (waste electrical and electronic equipment)
Poland
Marking on the product indicates that after the service-life of the product expires, it should not be disposed
with other type of municipal waste. Used equipment may have a negative impact on the environment
and health of people due to potentially containing hazardous substances, mixtures and components. Mixing
electric waste with other types of waste or disassembling those in an unprofessional manner may cause
a release of substances that are hazardous to the environment and health. Used equipment should be hand-
ed-over to a point for collection of electric waste. In order to obtain detailed information regarding the electric waste col-
lection points, the user should contact the municipal point of electric waste collection or used equipment processing de-
partment.
To Next Page
Loading...
Need help?
General
