THE KEEP WARM FUNCTION
• Touching the heating zone selection control, and touching the keep warm control
, the
zone indicator show “c “ , this means choosing the heating level for warming up and keeping
warm (about 55±15°C) with 2L of water.
THE PAUSE CONTROL
• when the cooking zones are running, touch the control, all the displays will show “P” and
stop heating.
• At this moment only “
“ and “ “ ” ” control can be operated.
• Touch “
“ again, the displays show the original setting, and the cooking zones keep on
heating.
THE FLEXIBLE AREA
This area can be used as a single zone or as two different zones, accordingly to the cooking
needs anytime.
Flexible area is made of two independent inductors that can be controlled separately. When
working as a single zone, a cookware is moved from one zone to the other one within the flex-
ible area keeping the same power level of the zone where the cookware originally was placed,
and the part that is not covered by cookware is automatically switched off.
Important! Make sure to place the cookwares centered on the single cooking zone. In case of big pot,oval,rec-
tangular and elongated pans make sure to place the pans centered on the cooking zone covering both cross.
Examples of good pot placement and bad pot placement.
AUTO SWITCH OFF
The hob will automatically switch off when you did not set cooking time, forgot to switch off
the hob, and did not operate the hob at all. The default working times for various power levels
are shown in the below table:
Power level 1 2 3 4 5 6 7 8 9
Default working timer ( hour ) 8 8 8 4 4 4 2 2 2
25
EN
To Next Page
