Need help?Do you have a question about the MR TAPMOTION ED 100-S/L and is the answer not in the manual?
General| Category | Industrial Equipment |
|---|---|
| Model | MR TAPMOTION ED 100-S/L |
| Type | Electronic tap-changer control |
| Input Voltage | 24 - 240 V AC/DC |
| Output Current | Max. 1 A |
| Protection Class | IP 20 |
| Operating Temperature | -20°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| Humidity | Max. 95% relative humidity, non-condensing |
| Weight | Approx. 0.6 kg |
Defines the intended use of the motor-drive unit and conditions for safe operation.
Provides essential safety guidelines for preventing accidents and damage.
Specifies the required qualifications for personnel handling the product.
Details the necessary personal protective equipment (PPE) for safe operation.
Step-by-step instructions for attaching the motor-drive unit to the transformer.
Instructions for correctly centering the on-load tap-changer and motor-drive unit.
Safety precautions and procedures for installing the electrical connections of the unit.
Step-by-step guide for preparing and commissioning the motor-drive unit.
Covers essential tests for ensuring correct electrical and mechanical operation.
Detailed instructions and safety warnings for operating the unit using the hand crank.
Crucial safety precautions to be observed during fault diagnosis and rectification.
Diagnosing and resolving faults where a switching operation remains incomplete.
To Next Page
