Need help?Do you have a question about the MR ECOTAP VPD I and is the answer not in the manual?
General| Brand | MR |
|---|---|
| Model | ECOTAP VPD I |
| Category | Industrial Equipment |
| Language | English |
Details the manufacturer's name and contact information.
Specifies supporting documents required for the technical file to be complete.
Advises keeping the technical file and supporting documents accessible.
Overview of symbols, textual emphasis, hazard communication, information, and instruction systems.
Defines the intended use of the ECOTAP® VPD® and conditions for safe operation.
Details prohibited operating conditions and risks of improper use.
Lists essential safety measures for transport, installation, operation, and disposal.
Details required personal protective equipment for various tasks and environments.
Emphasizes maintaining a clean, tidy, and well-lit work area.
Covers safety during operation, with current transformers, and explosion protection.
Outlines requirements for personnel involved in assembly, operation, and maintenance.
Covers safety markings, ambient conditions, modifications, and use of approved spare parts.
Lists items included in the product package and important notes.
Explains the principle and operation of the on-load tap-changer.
Details the available ECOTAP® VPD® versions (3-phase/1-phase).
Introduces component identification and refers to dimensional drawings.
Shows front view and identifies components of the ECOTAP® VPD® III without selector.
Shows front view and identifies components of the ECOTAP® VPD® III with selector.
Details the 1-phase ECOTAP® VPD® I, including connection contact configurations.
Describes product packaging, drying, and suitability of packaging for transport.
Procedures for shipping, receiving, and handling shipments, including damage reporting.
Guidelines for storing packaged goods to maintain their condition.
Instructions for unpacking and checking shipments for completeness and damage.
Steps for securely mounting the tap-changer onto the transformer cover.
Specific instructions for attaching the ECOTAP® VPD® III model.
Specific instructions for attaching the ECOTAP® VPD® I model.
Instructions for connecting tap winding and take-off leads, ensuring insulation.
Steps for mounting and preparing the motor-drive and control units.
Procedures for performing transformer ratio and DC resistance measurements.
Instructions and warnings for drying the tap-changer, motor-drive, and control units.
Guidelines for filling the transformer with new insulating oil and testing its quality.
Steps for commissioning the tap-changer at the manufacturer's site before delivery.
Covers electrical high-voltage tests on the transformer and associated safety precautions.
Procedures for performing dielectric tests on transformer wiring and disconnecting the control unit.
Steps to reset automatic adjustment before transformer transport.
Safety instructions and procedures for transporting the transformer to its operating location.
Steps for commissioning the transformer at its final operating location.
Procedure for safely switching on the low-voltage busbar.
Guidelines for monitoring the tap-changer, motor-drive, and control units via visual checks.
Details on operating the motor-drive and control units, including emergency operation.
Provides contact information for Maschinenfabrik Reinhausen GmbH's technical service.
Highlights risks of electric shock and explosion when performing maintenance.
Details general inspection steps, including visual checks for damage and leaks.
Instructions for reading the control unit's software version.
How to query the remaining life of the control unit's energy accumulator.
Procedure for testing the function of all LEDs and the display on the control unit.
Verifies the temperature blocking function when using alternative insulating fluids.
Outlines regular checks for transformer oil quality, including dielectric strength.
Notes no maintenance needed for tap-changer/motor-drive, and cleaning the housing.
Explains how tap-changer models are designated by various features.
Presents technical specifications for ECOTAP® VPD® III and I models.
Illustrates step capacity for models with and without change-over selectors.
Details permitted voltage stresses and required insulation distances for various configurations.
Explains potential shifts and lists permissible recovery voltage and breaking current.
Provides limit values for dielectric strength and water content of the transformer oil.
Notes that drawings are examples and order confirmation drawings are definitive.
Indicates that dimensional drawings are available for product dimensions.
Provides high-voltage connection diagrams for various ECOTAP® VPD® configurations.
To Next Page
