MRC FH-10A - Page 15

MRC Ltd
15 http://www.mrclab.com/
2.1.3. Protected object
The primary goal of the Fume Hood is to protect operators and laboratory environment
from exposure to infectious aerosol and toxic fumes which may be generated from the
reaction during experiments.
2.1.4. Technical parameters
Model
Parameter
FH-10A
FH-12A FH-15A FH-18A
Rated Voltage AC
220V±10%
110V±10%
Rated Frequency
50 Hz
60Hz
External Dimension
(W*D*H)
1040*800*2200 mm 1240*800*2200 mm 1540*800*2200 mm 1840*800*2200 mm
Working Zone
Dimension (W*D*H)
820*670*730 mm 1020*670*730 mm 1320*670*730 mm 1620*670*730 mm
Power Supply
Consumption
400 W 400 W 500 W 500 W
Inflow Velocity 0.3~0.8m/s
Maximum Opening 500mm 500mm 500mm 500mm
UV Lamp Consumption 20W 20W 30W 30W
Fluorescent Lamp
Consumption
T5 8W T5 12W T5 16W T5 16W
Noise ≤70dB(A)
NOTE: a) Power supply consumption includes the consumption loaded at
working zone, which should not exceed 500W.
b) MRC reserves the right to make changes in future product design,
without reservation and without notification to its users.