MRC FH-10A - 1 Unpacking, Installation and Debugging; Unpacking of Main Body

To Next Page

To Previous Page

MRC Ltd

3 http://www.mrclab.com/

1. Unpacking, Installation and Debugging

Please firstly check whether the packing box is in good condition. If the packing box is damaged,

please take photos and contact the freight carrier. MRC and its dealers are not responsible for

shipping damages

1.1. Unpacking of Main Body

Choose a proper unpacking method according to the actual situation.

1.1.1. For wooden box

a) Method 1 Necessary tools for unpacking: Electric drill with hexagon dead M8

Picture 1