MRC INE-PHB-4 - Page 6

5
Storing temperature(“℃”stops flashing)
Temperature Setting(“℃”is flashing)
Displaying STD1 the first point calibration
The first calibration is completed
Turn ON The Meter
Displaying STD2 to enter the second point calibration
The second calibration is completed
Model INE-PHB-4 operating flow diagram:
Press “MODE” button
Press “▲” or “▼” button
Press “ENTER:” button
Press “MODE” button Press “MODE” button
Press “ENTER” button
Press “MODE” button
Press “ENTER” button
Press “MODE” button Press “MODE” button
Press “MODE” button
Packing list
INE-PHB-4
Portable pH meter
NO.
d
Description Quant.
1
INE-PHB-
4 pH meter 1
2 PH combination electrode 1
3 Buffer pH4.7.9 5
4 Electrode holder for special purpose
1
5 Battery No.5. 4
6 Manual 1
Date: Inspector:
Displaying “MEAS” TO MV measurement
Setting temperature
Displaying “MEAS” to enter PH measurement
3, Hagavish st. Israel 58817
Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com
MRC.
1.18