To Next PageTo Next Page
Need help?Do you have a question about the MRC TM-8812 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Power | 9V Battery |
| DC Voltage Range | 200mV/2V/20V/200V/1000V |
| Resistance Range | 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ |
| Display Type | LCD |
| Diode Test | Yes |
| Continuity Buzzer | Yes |
| Transistor hFE Test | Yes |
| AC Voltage Range | 200V/750V |
| DC Current Range | 200μA/2mA/20mA/200mA/10A |
| Capacitance Range | 2nF/20nF/200nF/2µF/20µF |
| Frequency Range | 20kHz |
Highlights micro-computer LSI circuit, crystal time base for accuracy, wide range, high resolution, digital display, and automatic power off.
Details display type, measurement range, velocity range, resolution, accuracy, power supply, operating conditions, size, and weight.
Identifies and lists the function of each key and component on the device's front panel.
Provides a guide to select material codes for accurate thickness measurement based on material type.
Details the step-by-step procedure for calibrating the thickness meter using a standard block.
Explains how to perform thickness measurements, select units, and understand readings and power-off modes.
Guides on measuring thickness using a known velocity or determining velocity from a known thickness.
Instructs on how to replace the device's batteries when the battery symbol appears.
