Need help?Do you have a question about the MRC INE-PHS-3E and is the answer not in the manual?
Specifies the accuracy for electronic units, meter, and repetitive measurements.
Procedure for automatic calibration using standard buffer solutions.
Detailed steps for performing a single-point calibration.
Detailed steps for performing a two-point calibration.
Procedure for manual calibration with any standard buffer.
Instructions for measuring pH values in various conditions.
Specifies the accuracy for electronic units, meter, and repetitive measurements.
Procedure for automatic calibration using standard buffer solutions.
Detailed steps for performing a single-point calibration.
Detailed steps for performing a two-point calibration.
Procedure for manual calibration with any standard buffer.
Instructions for measuring pH values in various conditions.
General| Model | INE-PHS-3E |
|---|---|
| Category | Measuring Instruments |
| Type | pH Meter |
| pH Range | 0.00 to 14.00 pH |
| pH Resolution | 0.01 pH |
| pH Accuracy | ±0.01 pH |
| mV Resolution | 1 mV |
| mV Accuracy | ±1 mV |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | ±0.5 °C |
| Display | LCD |
| mV Range | -1999 mV to 1999 mV |
| Temperature Range | 0 to 100 °C |
| Temperature Compensation | Automatic |
| Power Supply | DC9V |
To Next Page
