Need help?Do you have a question about the MRC DT-2236 and is the answer not in the manual?
General| Measuring Range | 2.5 to 99, 999 RPM |
|---|---|
| Accuracy | ±(0.05% + 1 digit) |
| Test Range Select | Automatic |
| Display | 5-digit LCD |
| Operating Temperature | 0 to 50°C (32 to 122°F) |
| Storage Temperature | -10 to 60°C (14 to 140°F) |
| Resolution | 0.1 RPM (0.5 to 999.9 RPM); 1 RPM (over 1000 RPM) |
| Distance | 50 to 500 mm |
| Weight | 200 g (7 oz) including battery |
A reflective sticker applied to the object for accurate measurement.
The light beam emitted by the device for detecting the target.
An indicator light that confirms detection of the reflective mark.
The LCD screen showing measurement results and operational status.
The primary button used to start and stop measurements.
Button to access stored minimum, maximum, and last readings.
A switch to choose between Photo and Contact tachometer modes.
The cone or wheel attachment for contact RPM measurement.
A wheel attachment used for surface speed measurements.
The housing for the instrument's power source.
Procedure for measuring RPM using contact mode.
Procedure for measuring surface speed in m/min or ft/min.
To Next Page
