5-2 Surface Speed Measurement
A. Slide the FUNCTION SWITCH (3-7, fig.1) to
"m/min.(SURFACE SPEED) or "ft/min. (SURFACE
SPEED)".
B. Press the MEASURE BUTTON (3-5 fig. 1) and simply
attaching surface speed test wheel to the detector.
Release The MEASURE BUTTON (3-5 Fig.1) When
the reading stabilizes.
6. MEMORY CALL BUTTON OPERATION
6-1 The minimum, maximum and the last (final) readings
are automatically stored during measurement.
These values can be recalled anytime by pressing the
MEMORY CALL BUTTON(3-6, Fig. 1).
5
To Next Page
Loading...
