5
2. Adding the device
Press the emergency stop switch,
then turn the knob within 5 seconds
to release the switch, putting the
device into network configuration
mode.
Connect the phone to the WIFI
network and enable Bluetooth.
Open the app, click on “Add Device”,
and wait for device detection.
After successful detection, add the
device and input the WIFI name and
password, then wait for successful
device addition.
3. App usage instructions
On the app homepage, tap “S310” to
enter the device interface: Tap the
switch and slide right to charge.
1). Instant charging
On the app homepage, tap “S310” to
enter the device interface:
Tap “Charging Mode”, select the
scheduled charging time period, and
confirm to set the device for
scheduled charging.
2). Scheduled charging
On the app homepage, tap “S310” to
enter the device interface:
Tap “Settings > Charging Current >
Modify the current and confirm”. The
charging current must be between
6-32A; other values are invalid.
3). Adjusting current
On the app homepage, tap “S310” to
enter the device interface:
1) Create a family: Tap “Me > Home
Management > Create a Home >
Enter the Home Name and choose
room information as per personal
needs > Save”.
2) Add family members: Tap “Me >
Home Management > Select the
created family > Add Member >
Select invitation method > Share
information with family members”.
Family members, upon receiving the
information, log in to the [Smart Life]
App, go to “Me > Home Management
> Join a Family”, and enter the
invitation code (valid for 3 days).
3) Remove members: Tap “Mine >
Home Management > Select the
created family > Select added
Member > Remove Member”.
4) Management Permission: Tap “Me
> Home Management > Select the
created family > Select added
members > Family Role > Choose
Admin/Common Member”.
5). Device family sharing
On the app homepage, tap “S310” to
enter the device interface:
Automatic Upgrade: If a new device
upgrade is detected, an upgrade
prompt will automatically appear,
allowing users to choose to cancel or
upgrade immediately.
Manual Upgrade: “Mine > Settings >
6). Device remote upgrade
On the app homepage, tap “S310” to
enter the device interface:
To inquire records: Tap “Records” to
view.
To export records: Tap “Settings >
Export Charging Records > Enter
email + time period > Confirm”.
4). Charging record inquiry and export
To Next Page
Loading...