3.3.4 Charging
1. Plug the charging cable into the power source.
2. Attach the device to the magnetic charging contacts.
Status Indicator
Charging Static red Safe LED
Fully Charged Static green Safe LED
Charging Error Flashing red Safe LED
Software Update in Progress Flashing yellow Safe LED
During periods of non-use, the charger may remain connected to the device
Allow very hot or cold devices to stabilize for one hour at room temperature before attempting to charge. Minimum and
maximum ambient temperature to charge the device is 0 °C (32 °F)and 40 °C (104 °F) respectively. For best results, charge
device at room temperature of 23 °C (73 °F).
Charging may be interrupted when ambient temperature moves outside of the charging temperature. In this case, the
device will show an error. To resolve the error, remove the device from the charger and cease charging until the ambient
temperature is within the approved temperature range of 0 °C (32 °F)to 40 °C (104 °F).
15 ALTAIR io 4
US 3 Getting Started
To Next Page
Loading...
Need help?
General
