Maintenance
EVOLUTION 6000 series Truck Mounted Charger
13
US
Repairs
If the system LED does not illuminate or other measures
(→ chapter 4) are performed without success, the charging circuit fuse can be replaced.
Fig. 7 Circuit board
Fuse replacement to be performed as follows:
CAUTION
The only repair allowed by the user of the truck mounted charger is the replacement of
the charging circuit fuse on the PCB.
1 Charger fuse
WARNING
Before removing the rear casing panel, disconnect the power supply. Danger of electric
shock.
NOTICE
Only use MSA fuses (genuine spare parts).
To Next Page
Loading...
