Use
EVOLUTION 6000 Thermal Imaging Camera
33
US
3.12 Battery Care
Each time the camera is used, the batteries must be checked following the criteria below:
- Damage to the battery housing
- Damage to the battery contacts
- Dirt and debris on the batteries
- Proper function of the camera, charger device and all indicators
Cameras and accessories which do not pass this inspection must be removed from service until
they have been repaired.
Batteries which do not pass the test must be replaced.
NOTE: It is recommended to recharge batteries every six months if they have not been in use or
if they have not been kept continuously in a charger.
To Next Page
Loading...
