MSA G1 Facepiece - Marking; Certification

G1 Facepiece
10
Description
GB
2.4 Marking
The mask is marked on the outer faceblank as shown in Fig. 8:
Fig. 8 Marking of mask body
2.5 Certification
The masks comply with the following directives, standards or standardized documents:
The Declaration of Conformity can be found under the following link: https://MSAsafety.com/DoC
1 Manufacturing location code
2 Serial number
3 For applicable ATEX classification, see operating manual.
4 EN standard, class
5 CE-marking with notified body number (DEKRA EXAM, Zertifizierungsstelle Dinnendahlstr. 9, 44809 Bochum)
6 Part number/ATO code
MY XXXXXX
EN 136:1998 CL3+
0158
XXXXXXXXX
(X)
2
5
4
3
1
6
Approvals
Regulation (EU) 2016/425
0158
EN 136: 1998, class 3+
DEKRA
DEKRA EXAM GmbH, Dinnendahlstr. 9, 44809
Bochum,Germany, Notified Body number: 0158