56
3103-1001 Rev. 0
"Last SD Card Read OK" - This indicator displays the status of the last attempted SD card read as
initiated by the “Restore From: Factory Defaults/User Settings” button. If an unsuccessful attempt
results, the indicator will display “SD Card Read Fault”. Typical causes for this are either that the
SD card is missing for the Compactlogix slot, the SD Card is corrupt, or the User Settings Profile has
not been created on the SD card yet. Attempting to create a User Settings Profile via the “Save User
Settings to SD” and restoring from that profile may clear the “SD Card Read Fault”.
"Last SD Card Write OK" - This indicator displays the status of the last attempted SD card write as
initiated by the “Save User Settings to SD” button. If an unsuccessful attempt results, the indicator
will display “SD Card Write Fault”. Typical causes for this are either that the SD card is missing for
the Compactlogix slot, the SD Card is corrupt.
"SD Card Integrity OK" - This indicator displays the status of the data integrity on the SD Card.
After each save to the SD card, the processor checks the characteristics of the written data to ensure
proper formatting. In the event corrupt data the indicator will display SD Card Integrity Error”.
Typical causes for this are either that the SD card is missing for the Compactlogix slot or the SD
Card is corrupt.
"Diagnostics" - This is an HMI navigation button which switches the screen back to Diagnostics.
"System Menu" - A an HMI navigation button which switches the screen back to the System Setup
Menu.
To Next Page
Loading...
