MSA MultiGard 5000 User Manual

3103-1001 Rev. 0
MULTIGARD
®
5000 GAS SAMPLING SYSTEM
DOCUMENTATION PACKAGE
Description
Section
 Ultima X Series Gas Monitor, Product Information CD, P/N 10042446
1
MULTIGARD 5000 SYSTEM CONFIGURATION DATA
 MultiGard System Configuration
 User Configured Outputs Planning Matrix
2
MULTIGARD 5000 SYSTEM OPERATION AND MAINTENANCE
MANUAL
 Custom Functions and Feature Descriptions
 3103-1001 Rev. 0
3
SENSOR / ANALYZER MANUALS
 Ultima® X Gas Series Gas Monitor, P/N 10036101
 Ultima/Ultima X Series Controller and Calibrator, P/N 813379
 ChemGard Manual P/N 10031540
4
MULTIGARD 5000 SYSTEM SUPPORT DOCUMENTS
 Safe Handling of Compressed Gasses in the Laboratory and Plant
Matheson BR-11
 Replacement Parts Form

MSA MultiGard 5000 Specifications

General

Gases Detected	Combustible gases, Oxygen, Toxic gases
Operating Humidity	10% to 95% RH (non-condensing)
Sensor Type	Electrochemical, Catalytic Bead, Infrared
Power Source	Rechargeable Lithium-ion battery pack
Certifications	ATEX, IECEx, UL
Output	4-20 mA, Modbus
Display	Large LCD with backlight
Operating Temperature	-20°C to 50°C (-4°F to 122°F)

Summary

Multigard 5000 System Configuration Data

Custom System Definition

Details specific system configuration parameters and settings for the MultiGard 5000.

Factory Configured Parameters

Multigard 5000 System Operation and Maintenance Manual

Installation

Guides users through the physical installation process of the unit.

System Start-up / Set-up

Details procedures for initial system power-up, configuration, and calibration.

Operator Interface - OPEN ACCESS Screens

Operator Interface - SECURE ACCESS Setup

Details the secure access area for advanced system configuration.

Common Alarming

Details alarm, warning, trouble, and horn relay functions.

Maintenance

Outlines routine maintenance and troubleshooting procedures.

User Configured Outputs Option

Planning Matrix

Tool to plan and define functionality for user-configured outputs.

Output Trigger

Output Characteristics

Functionality Testing

Multigard 5000 System Configuration

Multigard 5000 System Factory Configured Parameters

Lists parameters set by the factory that cannot be changed by the user.

Multigard 5000 System Secured User Configured Parameters

Details user-configurable parameters that can be modified via secure access.

Multigard 5000 System Support Documents

Safe Handling of Compressed Gases in the Laboratory and Plant

Guidelines for the safe handling and storage of compressed gases.

Hazards

Pressure Relief Devices

Knowing the Gas to Handle

Proper Discharge of Cylinder Contents

Pressure Regulator Handling and Use

Leak Detection

Handling of Corrosive Gases

Gas Detection

Replacement Parts and Repair Ordering Information