Need help?Do you have a question about the MSA ALTAIR io 4 and is the answer not in the manual?
General| Brand | MSA |
|---|---|
| Model | ALTAIR io 4 |
| Category | Gas Detectors |
| Language | English |
General safety information and compliance notices.
Legal disclaimers and responsibilities of the user and employer.
Pre-use safety limitations and precautions.
Overview of the device's design features and capabilities.
Explanation of the Grid cloud-based safety software platform.
Introduction to the automated bump test and calibration system.
Overview of the digital device assignment solution.
Details on RFID tags for worker assignment.
Introduction to the device charging and return system.
Initial setup steps and what's included in the box.
How to manage the device using the Grid account.
List of items included with the ALTAIR io 4.
Identification of device components.
Explanation of the device's main display interface.
Process of adding devices to your Grid account.
Instructions for operating the device.
Steps to turn the device on and off.
How to navigate through device menus and functions.
Explanation of the Safe LED indicator.
Procedures for charging the device.
Guidelines for maintaining and understanding battery status.
How to access device status and details.
Procedures for confirming sensor functionality and accuracy.
Steps to perform a bump test on the device.
Procedures for calibrating the device's sensors.
How to set the zero point for sensors in fresh air.
Calibrating the zero readings for sensors.
Types and delivery methods of device alerts.
Details on notification types and delivery.
Explanation of warning types and delivery.
Description of alarm types and delivery.
How the device detects and reports gas levels.
Monitoring and calculating TWA exposure to toxic gases.
Monitoring and calculating short-term gas exposure.
Using factors to adjust gas readings.
Features ensuring adherence to safety protocols.
Enforcing bump tests before operation.
Enforcing calibration before operation.
Enforcing device assignment.
Additional safety functions like motion detection.
Monitoring worker movement for safety.
Activating emergency alarm.
Remotely triggering evacuation alarms.
Creating and applying device settings.
Configuring specific device settings.
How device data is stored and accessed.
Digital assignment and tracking of devices.
Using RFID tags for device assignment.
Process of assigning tags to users.
Assigning the device to a tag.
Process for returning a device.
Details on the charging and device return system.
Setting up the charging unit.
How software updates are delivered and installed.
General guidelines and warnings for device maintenance.
Instructions for routine cleaning and handling dust/water.
Step-by-step guide to replacing device sensors.
Instructions for replacing the device clip.
Guide to replacing the front housing.
Instructions for replacing the device's horn.
Steps to replace the device display.
Guide to replacing the back housing.
Information on obtaining replacement parts.
Guidelines for disposing of the device and batteries.
Details on the product warranty and its terms.
To Next Page
