To Next PageTo Next PageWhat to do if the MSG Equipment MS008 bench runs but the electric motor doesn’t start?
If the bench runs but the electric motor doesn’t start, this could be due to a variable speed drive software error. In this case, it is suggested to contact the dealer.
Why does the belt slip (whistles) when the MSG Equipment MS008 Test Equipment bench runs?
If the belt slips (whistles) when the bench runs, it could be due to insufficient belt tightening. Stop the drive and check the tightening intensity. Alternatively, the belt might be worn and need replacement.
How to fix MSG Equipment MS008 if the bench doesn’t start?
If the bench doesn’t start, it could be due to the automatic cut-out being activated. To resolve this, unscrew the rear bench cover and set the automatic cut-out into the up position. Another possible cause is that one of the bench supply phases (L1/L2/L3) or neutral N is not active, in which case you should restore the supply.
General| Brand | MSG Equipment |
|---|---|
| Model | MS008 |
| Category | Test Equipment |
| Language | English |
