MSI 2000 User Manual

13
CALIBRATE
Timer
Timer
Press Option
to select
Press Option
No
Yes
Use Aileron stick to
toggle between yes
and no. Press Option
to accept.
Moving Aileron stick to the
right advances in the direct
of the arrows. Moving
Aileron stick to the left
reverses the direction.
Press Option from any
selection to enter the
selected function.
Timer
Minutes 008
Timer
Minutes
Timer
Seconds
CALIBRATE
Timer
* Use elevator stick to
increase or decrease
value, press Option
to accept.
Timer
Mode
Timer
Seconds 015
Timer
EXIT Yes(No)
This function allows you to define the flight timers parameters. This counter is started by pressing the option
button when you are in the run mode. Pressing the option button again will stop the timer. When the timer is started
again, it will start counting down from the starting value defined in this function.
In this example the counter
is set to 8 minutes and
15 seconds.
Timer
Enable Switch
Timer
Throttle
Timer
EXIT
Timer
Throttle 50%
Enable Switch
ON
Mode
Down Timer
*
# Use elevator stick to
toggle through all of
the selections. Press
Option to accept.
#
Please refer to Timer
notes for a
discussion of these
parameters.

MSI 2000 Specifications

General

Brand	MSI
Model	2000
Category	Measuring Instruments
Language	English