MSI 2000 User Manual

16
CALIBRATE
SERVOS
SERVOS
Aileron
SERVOS
Elevator
SERVOS
CH5
SERVOS
CH6
SERVOS
Throttle
SERVOS
Rudder
SERVOS
CH7
SERVOS
CH8
SERVOS
EXIT
SERVOS
Save? Yes(No)
CALIBRATE
Press Option
Press Option
Press Option
Press Option
Press Option
Press Option
Press Option
Servos
To centering servo
setup.
To Throttle servo
setup.
To non-centering
servo setup.
To CH8 servo setup.
Use the aileron stick
to toggle between Yes
and No. Press option
button to make selection.
If Yes is selected the
new calibration parms
are written to SPROM.
Moving Aileron stick to the right
advances in the direct of the
arrows. Moving Aileron stick to
the left reverses the direction.
Press Option from any selection to
enter the selected function.

MSI 2000 Specifications

General

Brand	MSI
Model	2000
Category	Measuring Instruments
Language	English