MSI 2000 - Non-centering servo setup; CH5 High;UP; CH5 Low;DWN

19
SERVOS
CH5
CH5
Low/DWN
CH5
High/UP
CH5
EXIT
Press Option
to select
Press Option
CH5
Low/DWN 0.983mS
CH5
High/UP 1.540mS
CH5
EXIT Yes(No)
No
Yes
SERVOS
CH5
Use Aileron stick to
toggle between yes and
no. Press Option to
accept.
Use Elevator stick
to increase or decrease
the value. Press
Option to accept
changes.
Moving Aileron stick to
the right advances in the
direct of the arrows.
Moving Aileron stick to
the left reverses the
direction.
Press Option from any
selection to enter the
selected function.
Non-centering servo setup