MSI 694D PRO - Acpi Suspend Type; Pm Control by Apm; Video off Option

CHAPTER 3 AWARD
®
BIOS SETUP
3-23
ACPI Suspend Type
This item will set which ACPI suspend type will be used.
S1 (POS) The S1 sleeping state is low wake-up latency
sleeping state. In this state, no system context is
lost(CPU or chip set) and hardware maintains all
system context.
PM Control by APM
No System BIOS will ignore APM when
power managing the system.
Ye s System BIOS will wait for APM’s
prompt before it enter any PM mode
Note :Enable this for O.S. with APM like Windows
®
98, Windows
®
NT, etc.
Video Off Option
The settings are N/A, Standby, Doze, or Suspend. This option is for
choosing the setting in which the monitor will turn off.
N/A Always turn on.
Doze During Doze mode, the monitor will be turned
off.
Standby During Standby mode, the monitor will be turned
off.
Suspend During Suspend mode, the monitor will be turned
off.
The default setting is Standby.