CHAPTER 3 AWARD
®
BIOS SETUP
3-32
3.11 Frequency/Voltage Control
This section is for setting CPU Frequency/Voltage Control.
Auto Detect DIMM/PCI CLK
This item allows you to enable/disable auto detect DIMM/PCI
Clock. The settings are: Enabled, Disabled.
CPU Host/PCI Clock
This item allows you to select the CPU Host/PCI Clock.
CPU1/CPU2 Clock Ratio
This item allows you to set the CPU1/CPU2 Clock Ratio.
CPU1/CPU2 Vcore Select
This item allows you to select the CPU1/CPU2 system voltage .
Auto Detect DIMM/PCI Clk Enabled
CPU Host Clock (CPU/PCI) Default
CPU1 Clock Ratio x 3
CPU2 Clock Ratio x 3
CPU1 Vcore Select Default
CPU2 Vcore Select Default
Item Help
Menu Level >
↑ ↓ → ← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-safe defaults F7:Optimized Defaults
CMOS Setup Utility - Copyright(C) 1984-2000 Award Software
Frequency/Voltage Control
To Next Page
Loading...
