4-18
setting determines whether the system will be awakened from what power saving
modes when input signal of the PS/2 mouse is detected. Setting options: [Disabled],
[Enabled].
Resume by PCI Device (PME#)
This controls how and whether the system can be powered on by the devices
installed on PCI slots. Setting options: [Disabled], [Enabled].
Resume By RTC Alarm
This is used to enable or disable the feature of booting up the system on a sched-
uled time/date from the S3, S4, and S5 state. Setting options: [Disabled], [Enabled].
Date (of Month)
When Resume By Alarm is set to Enabled, the field specifies the date for Resume
By Alarm. Setting options: [0]~[31].
Resume Time (hh:mm:ss)
When Resume By Alarm is set to Enabled, the field specifies the time for Resume
By RTC Alarm. Format is <hour><minute><second>.
MSI Reminds You...
If you have changed this setting, you must let the system boot up until it
enters the operating system, before this function will work.
To Next Page
Loading...
